Huddly L1 vs Yealink MeetingBar A40 Comparison

Huddly L1

The L1 uses a 1 inch 20.3 MP CMOS sensor with 6K resolution and outputs 1080p or 720p at 30 fps. Dynamic Light Optimization balances exposure across bright windows and darker corners. The large sensor is the standout, giving clean faces with low noise in rooms that are dim or backlit.

Yealink MeetingBar A40

Dual 48 MP 4K lenses with an electronic gimbal and 10-bit HDR output up to 4K60. AI features include IntelliFocus, auto framing, speaker tracking, people counting and multi-focus framing. However, during my own hybrid session, multi-focus framing split several people into their own tiles, which makes a hybrid meeting feel more even.

Huddly L1

Zoom is digital, up to 5x, using the 6K sensor to crop without heavy quality loss. There are no moving parts or optical lens changes. In medium rooms, 5x digital zoom frames people at the far end with good clarity. In very deep rooms, faces at the back become softer than with an optical PTZ camera.

Yealink MeetingBar A40

The MeetingBar A40 has speaker tracking. Auto framing is included (Auto Framing, IntelliFocus). Official AI features include IntelliFocus, auto framing, speaker tracking, people counting, picture-in-picture, multi-focus framing, Smart Gallery (Zoom). Multi-stream or gallery options are listed as Picture-in-picture, multi-focus framing, Smart Gallery (Zoom). Zoom is listed as 6x digital. People counting is listed.

Huddly L1

The Huddly L1 has no built-in conferencing microphone. Official notes say video-only camera; official page says L1 pairs with the room audio solution you choose. It is specified for Medium to large rooms. When I commission a bar, I walk the table first and check whether the built-in array can cover the seats you actually have.

Yealink MeetingBar A40

I'd expect consistent voices along a typical table, with expansion mics covering the rest of a long table. Eight MEMS mics with high-quality pickup to about 4 m, and total reach near 6 m, suit medium tables. Two expansion mics cover the overflow seats at the far end. Enable expansion only after the base array is commissioned — stacking problems are harder to debug than starting clean.

Huddly L1

The L1 is certified for Microsoft Teams Rooms and works with Zoom and other UVC platforms. The Huddly app and Huddly Insights handle settings, updates and analytics. Huddly Insights can provide anonymous people count data, helping facilities teams understand how rooms are used. That supports space planning across an office.

Yealink MeetingBar A40

Teams sharing runs at 1080p in a meeting and 4K locally, which is fine for slides and spreadsheets. Teams Rooms on Android and Zoom Rooms cover the appliance majority; SIP/H.323 mode helps mixed estates. Certification badges matter for procurement checklists even when BYOD USB also works. Pick one primary platform per room and stick to it — dual-personality rooms create support tickets.

Huddly L1

The camera connects over a single RJ45 Ethernet cable with PoE to a Huddly USB to PoE adapter, which links to the room computer over USB 3.0. One cable to the camera simplifies installation, especially for wall mounts far from the PC. The adapter needs mains power and sits near the computer.

Yealink MeetingBar A40

Mounting and enrolling should take a short while per room. Yealink Device Management or YMCS, plus Teams Admin Center or Zoom Device Management, means you choose the plane of control that matches your tenant. Don't enable every cloud at once on day one. Schedule firmware in a maintenance window; gimbal and AI features sometimes reboot the bar.