
At a glance
| Accessory Type | Weighted desk stand |
|---|---|
| Works With | USB and XLR mics, webcams, compact cameras, lights, smartphones |
- Model Wave Desk Stand
- Released 2025
ElgatoLast updated on November 2026
Elgato Wave Desk Stand Review
Prices, shipping and returns are handled by the retailer.
On this page
Overview
Need a mic or webcam arm on a desk that can’t take a clamp? The Elgato Wave Desk Stand stands on a 1.88 kg weighted base, carries up to 1 kg and reaches 216 mm out and 411 mm up.
- Weighted base: no clamp or drilling
- 1 kg load rating
- 275° arm rotation, 360° head
- 1/4-inch thread with 3/8 and 5/8-inch adapters
Key Takeaways
- 1.88 kg weighted base
- 360° head rotation
- 4 silicone cable ties
Best For
- Home offices
- Glass desks
- Shared desks
Avoid If
- You want the mic fully off the desk
- Your mic and shock mount exceed 1 kg
Pros & Cons
The Wave Desk Stand is built for desks a clamp can’t grip: glass tops, very thick or rented desks, and setups that move. On a clampable desk, a boom arm reaches further for the same money.
PROS
- No clamp or drilling needed
- Holds up to 1 kg
- Adapters for most mics
- Works for webcams and lights too
CONS
- Base takes desk space
- Shorter reach than a boom arm
- Black only
Review Scores
Score Breakdown
7.2/10 Expert Score
- Primary Output Performance6.0/10
- Build & Desk Ergonomics7.7/10
- Universal Compatibility8.8/10
- Setup & Installation9.0/10
How this score is calculated
Each criterion is the weighted average of its available spec scores (0–10), calculated from official specifications using our Accessories scoring matrix. Empty specs are skipped, not scored as 0. The Expert Score is the weighted average of the scored criteria, shown out of 10; stars = Expert Score ÷ 2 (a 9.4/10 score is 4.7 stars), to one decimal. Not scored for this product (it doesn't apply, or the published specs don't cover it): Software Suite & Automation. Its weight is shared by the other criteria.
| Criterion | Weight | From specs | Score |
|---|---|---|---|
| Primary Output PerformanceAccessory Type (Lighting, Mounts & Stands, Docks & Hubs, Capture, Backdrops, Other): Weighted desk stand → 7.0; Max Load: 1.0 kg → 5.0; Mount Type: Weighted base → 6.0; Materials: Metal → 8.0 | 47% | 6.0 | 6.0 |
| Build & Desk ErgonomicsMaterials: Metal → 8.5; Mount Type: Weighted base → 6.0 | 24% | 7.7 | 7.7 |
| Software Suite & Automation | — | No software expected for this accessory type | N/A |
| Universal CompatibilityMount Thread: 1/4 inch with 3/8 and 5/8 inch adapters → 10.0; Compatible Devices: USB and XLR mics → 7.0 | 18% | 8.8 | 8.8 |
| Setup & InstallationTool-Free Setup: Yes → 10.0; In the Box: Wave Desk Stand → 9.0; Mount Type: Weighted base → 7.0 | 12% | 9.0 | 9.0 |
| Expert Score | 7.2/10 | ||
Elgato Wave Desk Stand Review
Elgato added the Wave Desk Stand to its Wave audio range as a freestanding alternative to the Wave Mic Arm LP. It targets desks where clamping is not possible, such as glass tops or rented furniture.
Primary Output Performance 6.0/10
Arm rotation is 275°, and the head rotates a full 360°. Horizontal reach is 216 mm and vertical reach is 411 mm.
That range lets a mic sit near the mouth but off to the side of the face, which shortens the mic-to-mouth distance on calls and recordings. Tension adjustment balances heavier gear within the 1 kg rating.
Compared with a clamp-mounted boom arm, the reach is shorter, but there is no mounting hardware to fit. The base takes up desk space, so measure the area beside the keyboard first.
Elgato lists it at $59.99, with the thread adapters and four silicone cable ties included.
For desks that can’t take a clamp, it offers more positioning range than a short tripod stand. On a desk with a usable edge, a low-profile boom arm reaches further.
Buyers with heavier XLR mics should add the shock mount’s weight to the mic’s and check the total against the 1 kg rating before ordering.
- Type Weighted desk stand
- Max Load 1.0 kg
- Mount Weighted base
- Materials Metal
Build & Desk Ergonomics 7.7/10
The stand uses solid-metal construction with a weighted base, and weighs 1.88 kg without accessories. Elgato rates it for loads up to 1 kg.
The base weight counterbalances a mic held out on the arm, and the tension-adjustable joints are what keep the arm in position once set.
It comes in black only, so it stays low-key if the stand appears in frame.
- Materials Metal
Universal Compatibility 8.8/10
The 1/4-inch thread includes adapters for 3/8 and 5/8 inch, covering nearly all USB and XLR mics, plus webcams, compact cameras, lights and phones.
Mics such as the Shure MV7+ fit the 1/4-inch thread directly, and a close placement keeps the voice clearer than a mic left on the desk.
For webcams, it gives a raised angle above a laptop, which looks more natural than a low built-in camera. Small LED panels and phones fit the same thread, so the stand can switch roles between meetings and recording sessions without extra parts.
- Thread 1/4 inch with 3/8 and 5/8 i…
- Devices USB and XLR mics
Setup & Installation 9.0/10
Setup takes minutes: attach the mic or device to the 1/4-inch thread, set tension, and position the arm. No clamp, drilling or tools are needed beyond the included hex key.
Four silicone cable ties route USB or XLR cables along the arm. To move it, lift by the base rather than the arm, since the base carries the counterweight.
It also works with Elgato’s Desk Plate for flush mounting and with the Prompter teleprompter.
- Tool-Free Yes
- In Box Wave Desk Stand
- Mount Weighted base
Full Specifications
General
| Best For | Mics or webcams on desks without a clamp edge |
|---|---|
| Release Year | 2025 |
| Launch Price | $59.99 |
| Use Case | Microphones, webcams, lights, phones |
| Colors | Black |
| Model Number | 10AAU9901 |
Primary Output Performance 6.0/10
| Accessory Type (Lighting, Mounts & Stands, Docks & Hubs, Capture, Backdrops, Other) | Weighted desk stand |
|---|---|
| Max Load | 1.0 kg |
| Mount Type | Weighted base |
| Materials | Metal |
Build & Desk Ergonomics 7.7/10
| Weight | 1.88 kg |
|---|---|
| Adjustable | Tension-adjustable arm, 275° arm rotation, 360° head |
| Cable Management | 4 silicone cable ties |
Universal Compatibility 8.8/10
| Mount Thread | 1/4 inch with 3/8 and 5/8 inch adapters |
|---|---|
| Compatible Devices | USB and XLR mics, webcams, compact cameras, lights, smartphones |
| Works With | USB and XLR mics, webcams, compact cameras, lights, smartphones |
Setup & Installation 9.0/10
| Tool-Free Setup | Yes |
|---|---|
| In the Box | Wave Desk Stand, 4 cable ties, 3/8 and 5/8 inch adapters, hex key, quick start guide |
Product Details
| Brand | Elgato |
|---|---|
| Model | Wave Desk Stand |
| Model number | Wave Desk Stand |
| Release year | 2025 |
Price Comparison
| Store | Price | Deal |
|---|---|---|
| Elgato.comOfficial Elgato store | Launch price $59.99 | View deal (opens in a new tab) |
The Verdict
Buy the Elgato Wave Desk Stand if your desk has no edge a clamp can grip, or the rig moves between rooms, and the mic, webcam or light weighs under 1 kg.
Skip it if your desk takes a clamp and you want the mic fully off the surface: the Elgato Wave Mic Arm LP reaches further and leaves the desk clear.
This review is research-based, drawn from Elgato’s product page and specifications. Its Expert Score comes from those specifications, weighted as set out in How We Score.
FAQs
How much weight can the Wave Desk Stand hold?
Up to 1 kg.
Does it clamp to a desk?
No, it uses a weighted base.
What threads does it support?
1/4 inch with 3/8 and 5/8 inch adapters.
Can I mount a webcam?
Yes, webcams, lights and phones also fit.
How far does it reach?
216 mm horizontally and 411 mm vertically.
How heavy is the stand?
1.88 kg.
Does it include cable management?
Yes, four silicone cable ties.
What does it cost?
$59.99.



