Audio-Technica AT2020USB-XP vs Logitech G Yeti Comparison

Audio-Technica AT2020USB-XP

The capsule is a cardioid condenser, and the converter runs at up to 24-bit / 192 kHz, far beyond what calls need. Audio-Technica rates the frequency response at 20 Hz to 20 kHz. The Rode NT-USB+ is the closest USB condenser alternative. For voiceover work the high sample rate gives editing headroom.

Logitech G Yeti

Logitech lists 16-bit / 48 kHz conversion, a 20 Hz to 20 kHz response and a 120 dB maximum SPL at 0.5% THD. The three 14 mm condenser capsules give the Yeti a bright, detailed character. Voices sound open and airy at about 15 to 20 cm, with more top-end sparkle than a typical dynamic.

Audio-Technica AT2020USB-XP

As a condenser, it hears more of the room than a dynamic mic, and the cardioid pattern rejects mainly from the rear. That makes placement more important than with Shure's dynamic models. The built-in AI noise reduction is the XP's answer. A button on the body toggles processing that removes steady background noise, such as fans and traffic, before the signal reaches your app.

Logitech G Yeti

A rear switch selects cardioid, bidirectional, omnidirectional or stereo. Cardioid is the mode for meetings, while bidirectional suits two people sitting across a table. Omni picks up a whole circle of speakers, which is handy for an impromptu group call around one laptop. Stereo adds width for music or ambient recordings but adds little to speech.

Audio-Technica AT2020USB-XP

A mute button with a status light sits on the front, alongside a headphone volume knob and a mix control that balances your mic against computer audio. The mix knob is useful on calls, because you can hear yourself naturally without echo while still hearing the far end. Most rivals at this price only offer a fixed monitor level.

Logitech G Yeti

On the front sit a mute button with a status light and a headphone volume dial. A gain dial on the rear sets sensitivity, and the 3.5 mm jack provides latency-free monitoring. A physical mute that works in any app is valuable in meetings. The light flashes red when muted, so a quick glance confirms whether your colleagues can hear you.

Audio-Technica AT2020USB-XP

The AT2020USB-XP does not list a named companion app. Onboard DSP is listed as Onboard noise reduction (3 levels) and automatic gain control. AI noise processing includes built-in AI noise reduction. The software or onboard controls also include monitoring (3.5 mm), gain control (switchable automatic gain control) and a mix control.

Logitech G Yeti

The Yeti uses Logitech G HUB for its companion software. Onboard DSP is listed as Blue VO!CE (via G HUB). The software or onboard controls also include EQ or presets (EQ in G HUB / Blue VO!CE), monitoring (3.5 mm headphone output), gain control (rear dial) and a limiter (Blue VO!CE limiter in G HUB).

Audio-Technica AT2020USB-XP

The body is metal, with a short tripod desk stand and a standard thread for boom arms. The included stand is functional but low. Most desks benefit from a boom arm, which lifts the mic to chin height and keeps it further from keyboard vibration. There is no shock mount in the box.

Logitech G Yeti

The mic alone weighs 550 g, and the metal desk stand adds about 1 kg. An internal shock mount isolates the capsule array from small knocks and desk vibration. The side-address design means you speak into the front, not the top. You can remove the stand and mount it on a boom arm, though its weight calls for a solid arm rather than a light clamp-on model.