
At a glance
| Accessory Type | Desk clamp mounting pole |
|---|---|
| Works With | Devices with a standard 1/4-inch thread; all Multi Mount components |
- Model Master Mount L
- Released 2020
ElgatoLast updated on November 2026
Elgato Master Mount L Review
Prices, shipping and returns are handled by the retailer.
On this page
Overview
Need one desk clamp to hold a camera, light and phone? The Elgato Master Mount L is a steel pole that extends from 55 to 125 cm, carries up to 2 kg and anchors Elgato’s Multi Mount system.
- 55 to 125 cm height range
- 2 kg load rating
- 1/4-inch ball head
- Clamp for desks up to 6 cm thick
Key Takeaways
- Steel construction
- 1/4-inch ball head
- SKU 10AAB9901
Best For
- Overhead cameras
- Key lights
- Modular rigs
Avoid If
- Your desk is thicker than 6 cm
- You need a freestanding stand
Pros & Cons
Master Mount L is a desk pole for overhead shots and multi-device rigs. Its value grows with Multi Mount arms, which cost extra, and it needs a desk edge up to 6 cm thick.
PROS
- Tall 125 cm reach for overhead shots
- Holds up to 2 kg
- Expands with Multi Mount arms
- Padded clamp protects desks
CONS
- Clamp limited to 6 cm desks
- Extra arms cost more
- Pole is visible in wide shots
Review Scores
Score Breakdown
8.6/10 Expert Score
- Primary Output Performance8.5/10
- Build & Desk Ergonomics8.3/10
- Universal Compatibility8.8/10
- Setup & Installation9.0/10
How this score is calculated
Each criterion is the weighted average of its available spec scores (0–10), calculated from official specifications using our Accessories scoring matrix. Empty specs are skipped, not scored as 0. The Expert Score is the weighted average of the scored criteria, shown out of 10; stars = Expert Score ÷ 2 (a 9.4/10 score is 4.7 stars), to one decimal. Not scored for this product (it doesn't apply, or the published specs don't cover it): Software Suite & Automation. Its weight is shared by the other criteria.
| Criterion | Weight | From specs | Score |
|---|---|---|---|
| Primary Output PerformanceAccessory Type (Lighting, Mounts & Stands, Docks & Hubs, Capture, Backdrops, Other): Desk clamp mounting pole → 7.0; Max Load: 2 kg → 8.0; Mount Type: Desk clamp (up to 6 cm) → 9.0; Height Adjustment: 55 to 125 cm → 10.0; Materials: Steel, hard composite, tough rubber → 8.0 | 47% | 8.5 | 8.5 |
| Build & Desk ErgonomicsMaterials: Steel, hard composite, tough rubber → 8.5; Mount Type: Desk clamp (up to 6 cm) → 8.0 | 24% | 8.3 | 8.3 |
| Software Suite & Automation | — | No software expected for this accessory type | N/A |
| Universal CompatibilityMount Thread: 1/4-inch ball head → 10.0; Compatible Devices: Devices with a standard 1/4-inch thread → 7.0 | 18% | 8.8 | 8.8 |
| Setup & InstallationTool-Free Setup: Yes → 10.0; In the Box: Master Mount L → 9.0; Mount Type: Desk clamp (up to 6 cm) → 7.0 | 12% | 9.0 | 9.0 |
| Expert Score | 8.6/10 | ||
Elgato Master Mount L Review
Elgato’s Multi Mount system is a modular set of poles, arms and clamps. Master Mount L is its tallest standalone pole, used on its own or as the base for more complex rigs.
Primary Output Performance 8.5/10
The main feature is expandability. Accessories such as the Solid Arm and Flex Arm attach to the pole to add mounting points.
That lets one clamp hold a light, camera and phone together. The ball head adjusts the angle for overhead framing.
The pole moves between a webcam height above a monitor and an overhead position for demos, and cables can run along the pole with ties.
At $59.99, the pole costs about the same as a basic light stand, but it offers more height and expandability.
Arms and extra clamps add to the total, so plan the rig before buying.
For people who show paper notes, sketches or hardware on calls, a pole with a webcam overhead is a lower-cost route than a dedicated document camera.
- Type Desk clamp mounting pole
- Max Load 2 kg
- Mount Desk clamp (up to 6 cm)
- Height 55 to 125 cm
Build & Desk Ergonomics 8.3/10
The pole is made from steel, hard composite and tough rubber, with a padded desk clamp and a ball head with a 1/4-inch screw. It supports loads up to 2 kg.
Elgato specifies a steel pole, and the rubber padding on the clamp protects wooden or laminate desks.
- Materials Steel
- Mount Desk clamp (up to 6 cm)
Universal Compatibility 8.8/10
Elgato says Master Mount L fits most cameras, lights and microphones with a standard 1/4-inch thread, and works with every Multi Mount component.
It can hold a Key Light Air, or a webcam that needs height above the monitor. Phone holders add a second camera angle.
Third-party gear with a 1/4-inch thread also fits, making it a flexible base for mixed brands. Check that combined accessories stay under the 2 kg limit, especially with metal arms and larger lights.
- Thread 1/4-inch ball head
- Devices Devices with a standard 1/4…
Setup & Installation 9.0/10
Clamp it to a desk up to 6 cm thick, mount the device, and set the height between 55 and 125 cm. No tools are needed for basic setup.
The tall maximum height is useful for overhead document cameras and top-down product demos in meetings. At its lowest setting, it raises a webcam above a monitor for a more natural eye line.
Adding arms and clamps takes a few minutes, as all Multi Mount parts share common fittings.
- Tool-Free Yes
- In Box Master Mount L
- Mount Desk clamp (up to 6 cm)
Full Specifications
General
| Best For | Overhead cameras, lights and modular desk rigs |
|---|---|
| Release Year | 2020 |
| Launch Price | $59.99 |
| Use Case | Cameras, lights, microphones, phones |
| Model Number | 10AAB9901 |
Primary Output Performance 8.5/10
| Accessory Type (Lighting, Mounts & Stands, Docks & Hubs, Capture, Backdrops, Other) | Desk clamp mounting pole |
|---|---|
| Max Load | 2 kg |
| Mount Type | Desk clamp (up to 6 cm) |
| Height Adjustment | 55 to 125 cm |
| Materials | Steel, hard composite, tough rubber |
Build & Desk Ergonomics 8.3/10
| Adjustable | Height and ball head |
|---|
Universal Compatibility 8.8/10
| Mount Thread | 1/4-inch ball head |
|---|---|
| Compatible Devices | Devices with a standard 1/4-inch thread; all Multi Mount components |
| Works With | Devices with a standard 1/4-inch thread; all Multi Mount components |
Setup & Installation 9.0/10
| Tool-Free Setup | Yes |
|---|---|
| In the Box | Master Mount L, ball head with 1/4-inch screw, desk clamp |
Product Details
| Brand | Elgato |
|---|---|
| Model | Master Mount L |
| Model number | Master Mount L |
| Release year | 2020 |
Price Comparison
| Store | Price | Deal |
|---|---|---|
| Elgato.comOfficial Elgato store | Launch price $59.99 | View deal (opens in a new tab) |
The Verdict
Buy the Elgato Master Mount L if you want an overhead camera for demos or a light-and-camera rig on one clamp, and your desk edge is up to 6 cm thick.
Skip it if you only need a mic arm: the Wave Mic Arm LP is built for that job. A desk thicker than 6 cm or one with no usable edge needs a freestanding stand.
Our assessment is based on Elgato’s product page and specifications. See How We Score for how the Expert Score weighs each criterion.
FAQs
What height range does Master Mount L offer?
55 to 125 cm.
How much weight can it hold?
Up to 2 kg.
What desk thickness does the clamp fit?
Up to 6 cm.
What thread does it use?
A 1/4-inch ball head.
Is it part of Multi Mount?
Yes, it is the core of the system.
Does it need tools?
No.
What is it made of?
Steel, hard composite and rubber.
What does it cost?
$59.99.



