Rode NT-USB+
Rode NT-USB+ | Image credits: Rode

At a glance

TypeCondenser
PatternCardioid
Sample Rate48 kHz
MonitorYes (3.5 mm)
MuteNo
ConnectUSB-C
  • Model NT-USB+
  • Released 2022
See full specifications

RodeLast updated on November 2026

Rode NT-USB+ Review

Expert ScoreStrongHow we score
  • Cardioid condenser
  • Rode Central app
  • Tripod desk stand

Prices, shipping and returns are handled by the retailer.

On this page

Overview

The Rode NT-USB+ is a cardioid condenser USB-C microphone with Rode's Revolution preamp and APHEX processing, built for voiceover, podcasts and clear video calls from a quiet desk.

  • Revolution high-gain preamp
  • Zero-latency headphone monitoring
  • Pop filter and desk stand included
  • USB-C, 24-bit / 48 kHz

Key Takeaways

  • Richer voice detail in soft rooms
  • Monitoring jack to judge distance
  • Stand and pop filter in the box

Best For

  • Quiet home offices
  • Voiceover desks
  • Simple USB call setups

Avoid If

  • Your room is untreated and noisy
  • You need tap-to-mute on the mic body

Pros & Cons

The NT-USB+ gives you studio-style condenser detail without an interface. It suits quiet rooms and careful speakers, and the included pop filter and tripod mean nothing else to buy. There is no hardware mute, so keep a hand near your call app.

PROS

  • Revolution high-gain preamp
  • Zero-latency monitoring
  • Pop filter and stand included
  • Natural condenser detail

CONS

  • Picks up more room noise than a dynamic
  • No hardware mute button
  • USB-C only

Review Scores

Score Breakdown

7.8/10 Expert Score

How this score is calculated

Each criterion is the weighted average of its available spec scores (0–10) from our Microphones scoring matrix. Empty specs are skipped, not scored as 0. The Expert Score is the weighted average of the scored criteria, shown out of 10; stars = Expert Score / 20, rounded to the nearest half star.

CriterionWeightFrom specsScore
Capsule Quality & FidelityTransducer Type: Condenser → 7.5; Sample Rate: 48 → 7.5; Bit Depth: 24 → 9.5; Frequency Response: 20 Hz – 20 kHz → 8.040%8.18.1
Interface Versatility & PatternsConnection: USB-C → 10.0; XLR Output: No → 4.0; Polar Pattern: Cardioid → 9.0; Number of Patterns: 1 → 6.020%7.77.7
On-Mic Hardware ControlsGain Control: Software only → 10.0; Zero-Latency Monitoring: Yes → 10.0; Touch Mute: No → 3.0; Headphone Monitoring: Yes (3.5 mm) → 8.015%8.08.0
DSP Engine & SoftwareOnboard DSP: APHEX Aural Exciter → 4.0; Software / DSP: Rode Central → 6.0; Noise Gate: yes → 10.015%5.45.4
Mounting & ShockStand / Mount: Desk tripod included → 10.0; Pop Filter / Windscreen: Detachable pop filter (included) → 10.010%10.010.0
Expert Score7.8/10

Rode NT-USB+ Review

Rode released the NT-USB+ in 2022 to replace the long-running NT-USB. The capsule design carries over, while the electronics gained the Revolution preamp, higher-resolution conversion and on-board APHEX processing that you control from Rode’s software.

Capsule Quality & Fidelity 8.1/10

  • Element Condenser
  • Sample Rate 48 kHz
  • Bit Depth 24 bit
  • Freq. Range 20 Hz – 20 kHz

Interface Versatility & Patterns 7.7/10

  • Connect USB-C
  • XLR No
  • Pattern Cardioid
  • Patterns 1

On-Mic Hardware Controls 8.0/10

  • Gain Software only
  • Zero Lat. Yes
  • Monitor Yes (3.5 mm)

DSP Engine & Software 5.4/10

  • DSP APHEX Aural Exciter
  • Software Rode Central

Mounting & Shock 10.0/10

  • Stand Desk tripod included
  • Pop Filter Detachable pop filter

Full Specifications

General

Best ForQuiet home offices and voiceover
Microphone TypeCondenser
Release Year2022
Use CaseVoiceover, podcasts and video calls

Design & Build

Stand / MountDesk tripod included
MaterialsMetal body
ColorsBlack
Pop Filter / WindscreenDetachable pop filter (included)
Boom Arm CompatibleYes

Audio

Polar PatternCardioid
Frequency Response20 Hz – 20 kHz
Sample Rate48 kHz
Bit Depth24 bit
Number of Patterns1
Transducer TypeCondenser
Low-Cut FilterYes (high-pass filter in Rode Central / Connect)
Onboard DSPAPHEX Aural Exciter, Big Bottom, compressor, noise gate

Controls & Monitoring

Headphone MonitoringYes (3.5 mm)
Mute ButtonNo
Gain ControlSoftware only
Headphone VolumeYes
Presets / EQAPHEX processing via Rode software
Zero-Latency MonitoringYes

Connectivity

ConnectionUSB-C
Software / DSPRode Central, Rode Connect, Rode Reporter
USB ConnectorUSB-C
XLR OutputNo
OS CompatibilityWindows, macOS, iPadOS, Android
Phone / Tablet SupportYes
Multi-Mic SupportYes (two units in Rode Connect)

In the Box

In the BoxNT-USB+, pop filter, desk tripod, USB-C cable
WarrantyRode limited warranty

Identifiers

Model NumberNTUSB+

Product Details

BrandRode
ModelNT-USB+
Model numberNTUSB+
Release year2022

Price Comparison

StorePriceDeal
Rode.comOfficial Rode storeSee priceView deal (opens in a new tab)

The Verdict

I’d pick the NT-USB+ for a quiet office where you care about natural voice detail more than a mute button. If the room is loud, go for a dynamic like the Shure MV7+.

FAQs

What connection does the NT-USB+ use?

USB-C for both audio and power.

Does it include a pop filter and stand?

Yes. A detachable pop filter and a desk tripod come in the box.

Is there zero-latency monitoring?

Yes. The 3.5 mm headphone output monitors directly from the preamp with no delay.

What is the Revolution preamp?

Rode’s low-noise, high-gain preamp, also used in its interfaces, built into this mic.

Is there a mute button?

No. You mute in your call app or in the operating system.

What APHEX effects are included?

The Aural Exciter and Big Bottom, plus a compressor, noise gate and high-pass filter, all set in Rode software.

Can I use two NT-USB+ mics together?

Yes. Rode Connect supports more than one NT-USB+ on the same computer.

Does it work with phones and tablets?

Yes. It is class compliant and works with iPadOS and Android devices that support USB audio.